I had some not so nice joins between parts after a glue failure, so I hid the ugliness with some nice red paint.
I sanded starting a 80 grit on the belt sander (Don »t do this, it melts the plastic)
I worked my way up the grits to 400 grit, hand sanding.
Then used some high gloss enamel paint.
The result were quite reasonable.
I would not suggest…En afficher davantage

Yep,, that right,,, buy all different Sandpaper Grades in the small rolls or sheets you will need some 800grit for sanding between coats of the Spray Putty and 1200grit for Sanding between the finish coats but get some 250grit /400grit/600grit for the rough work it just depends on how rough the Plastic Surface is to start with – Dulux have r…En afficher davantage

Hello Hugues,
I am the only one updating the files on InMoov site, it’s a LOT of work to maintain, I can tell you that, and I do that only to please others for free…
The parts you are talking about has been updated in 2015.
I discovered that I forgot to update the ZIP file which contains the version LowerBackV2 file.
A while ago I wanted to…En afficher davantage

Awesome,,, It’s great to see your R&D work on his mechanical operation for this section–,,,

This is awesome,
How long before we start to see the files for the different parts?
I am very interested in the files for the feet and ankle drive system.

That is one of the better parts to print all in one.

Hi John
Take a look at the assembly sketches here:

Assembly Sketchs

Look at the sketches in the torso and shoulder sections for a steer

Ahoy Mindless!
Most excellent work

Thank you 🙂

Super, donc avec LocalSpeech les voix Voxygen peuvent être prise en charge.
Je n’ai jamais tenté cette direction. Merci à Anthony et Dominique pour cette intégration dans MRL.

Hello Mindless,
You must have the first version, this was an issue that was reported a few days after I posted the parts. I have modified since then. ( I had mixed a piece of the motorized legs with the non motorized when uploading)
ThighLowRightV3.stl
ThighLowLeftV3.stl

Cool, when InMoov does Shakespear!
Lots of phrases to add in the script.

Sans hésiter ABS.

Non les voix de Voxygene ne sont pas prise en charge, à moins que celle-ci puissent être utilisé par LocalSpeech.
Par contre, il y a d’autre voix disponible pour le Français qui peuvent-être paramétrées directement dans les configs, mais il faut un compte gratuit comme par exemple avec VoiceRss ou Polly.
Autre exemple avec les voix de votre Window…En afficher davantage

Nice work Mindless 🙂
I’ve posted a rear end view here: http://inmoov.fr/members/acapulcorolf/album/picture/1152/

Thanks for posting Mindless!

It’s very interesting to see how the legs were mapped based on my 3D scan of full InMoov. Great work with the leg mecanism!
Someday InMoov will walk!

Waoo cool!

Une fois l’installation de MRL effectuée:
Ouvrir avec un editeur de texte: InMoov/config/_InMoov.config.default
Modifier:
[TTS]
MyLanguage=fr
; en,fr,es,de,nl,ru,hi
MyvoiceTTS=MarySpeech
; you can use MarySpeech,Polly,VoiceRss,LocalSpeech,IndianTts
MyvoiceType=upmc-pierre-hsmm

Enregistrer, redémarrez en double cliquant sur START_INMOOV.bat

Nice legs!
I am kidding…
Good progress, what is your plan about that TV drama CF? Can you tell me more about it?

It seems to be CF related to American drama to be broadcast in Korea.
CF is a scene where a robot with AI is talking to a person, and Inmoov will be used at that time. Maybe Inmoov is only moving Jaw.

Please Answer me , I need your approval …^^

Check out this tutorial, http://inmoov.fr/neck-and-jaw/. There’s a comment about it towards the end.

Looks great! You may want to put the bolted joints of the socket, front and back or else the side servos may hit them.

Nice and smooth.

I used a HS-805 BB – works great.

All parts list and BOM page:

Hi what is the recommended main servo for the head. I am trying to work out the size to get so I can start fitting it together. Kind Regards Ian- John Hughes (@templar66) December 10, 2017

2x Hitec HS805BB HEAD 4 AXIS
1x servos HK15298B JAW MECHANISM
2x Servo DS929hvCorona or similar EYE MECHANISM

Lmao—I didn’t know where it was coming from at first,,, just this random- sshhhiiiiittt -,,

Cool,,, which software ya using for the model-?,, its looking good–,,

Super, I love to see these progress!

Ohh Yeah,,, don’t forget to “Hot Tap” the Screws in or you split them again,, just use a Candle or a Tea light – heat the tip of the screw until you just feel the head staring to burn your finger tip-

Hi Mindless, hoping that you can work your magic on this particular variant too…

https://www.thingiverse.com/thing:2710750

🙂

Hello,
It sounds like you have tangled the tendons somewhere. Inside the finger itself perhaps. This affects the ability to move a finger, because when one tendon tries to pull it also stops the other tendon to release.
And yes each finger needs it’s own min and max position.

Cool,,, File work is common–,, I’v built a lot of weird contraption over the years for farmers and you quickly realize its always easier to remove Material then it is to add Material–,,
PS- Whats that software ?

Ah, now InMoov has a legging!
Nice work shop by the way!

Sweet,,,, like the Black patch on his Legs (Thigh) gives him that extra cool factor,–

very nice

Try printing the Rotworm a little smaller – like 98%.

Compter environ 3 kg de pla pour réaliser les jambes .
Count approximately 3 kg of pla to realize the legs.

Hello,
On your picture you are giving an angle between thos two parts, but if you align the holes there shouldn’t be any gap. (Or almost no gap, it depends on the quality of your print)
See the image:
http://inmoov.fr/wp-content/uploads/2017/12/Sans-titre.png

Hey, rock it!!

Start of a New Mod on Bob/Alans 3 Stage Neck System–
I want to be Able to Print or Make the Ball for the Ends separately ,, this is a Mod iv wanted to do for a while (not sure how it will turn out) — has anyone else out there replaced the Printed Ballends with a Tie Rod or Ball Joint –?

Not that I know of,,, its pretty easy to work out once you play around with the Parts for a while,,, it just take a bit of time to get the whole project worked out—- thats one reason why i built- « 3d Inmoov »- so i would know every Sq/mm of him–,,

As you can see the worm gear still needs a bit of work,, the slight Taper at the top was settings error ( printed to slow and to hot)—but its tough as hell ,,,took 40kg of pressure with ease – got the 100% infill dialled in nicely which is Make or Break when it comes to the Strength of the Part,,,,

Looking good,,, shop around for Servos and spend a day or 2 researching them,,,, I just uses Ebay to get a price average –

9G SG90 Micro Servo — the x2 small ones for the eyes-,, these are the cheapest you can get,,,, and you get what you pay for when it comes to servos—(normally)

MG996R Servos – these are the “Standard size” servos find in 1/1…En afficher davantage

Ha..Ha – He looks Confused–,,
The Prints look fantastic and that Bottom Photo is awesome–,,

Heres a-”quote” about gluing PLA – and a link to– RepRap –

Talking to the technical department of Loctite their advice was to use Loctite 401, and although slightly expensive; £21.00 for 20g it sticks like the proverbial pig to a blanket. Just 3 or 4 drops, push together for about 30 seconds and its done. I’ve tried pulling, pushing and hitt…En afficher davantage

Queensland – Australia,,, – I grew up in a really errr Redneck place- small country town guns and flannelette shirts everywhere—but I travelled the east coast of Australia working my way up and down for years– still got family in my home town and head to farm quite often but spend most of my time on the Gold Coast in Queensland – ( the chicks…En afficher davantage

I have good luck sculpting the perfect shape while it is still hot. Sometimes I melt a kg in a pan and hand mold a perfect part. In fact I sold my printer long ago.

Great quality prints. Nice to see your progress.

That is Awesome-work-,,, this is what Inmoov is all about—My young fella will be starting next year if I can get that bloody I-Phone out of his hands-,,lol

Marcel you are young so I want to offer advice. Then I look at your build and I feel like I need to ask for advice. Keep it up bud.